HUB PUNCH-LOK BAND, 5/8" X 6"
Part #
20320054
Availability
Average Rating
0.0/5 from 0 reviews
Compare
Please log in to order products.
Product Information
Punch-Lok Bands
Punch-Lok Bands are applied over the tail of a grip to prevent the mesh from being tripped or pulled loose. Also, they assure full gripping action by locking the mesh of the tail in tight contact with the cable or rope. When the tail of a grip is the leading end, the bands are particularly important to prevent accidental release caused by tripping on obstructions. A conductor-to-conductor (double-socking) pulling operation is a good example: where two grips connect two conductors to form a temporary splice. Bands should be applied to the ends of the grips as illustrated herein. It is also common practice to tape over the banded tail area to assure smooth passage through the sheaves.
Manufacturer
UPC
783585326481

